Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
This guide will most likely be utilized if one of the RAM modules becomes corrupted or you wish to upgrade to a higher amount of RAM if applicable.
Was du brauchst
-
-
-
Unscrew the four screws (3mm Phillips #1) that hold the base cover in place.
-
-
-
Spread apart the securing clips on each end of the memory stick until the memory stick pops up.
-
Remove the memory stick from the laptop.
-
Repeat these steps to remove the second memory stick.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
9 weitere Nutzer:innen haben diese Anleitung absolviert.