Was du brauchst
-
-
Close the display and turn the computer over.
-
Slide the battery-release latch to the unlocked position
-
Lift the battery at an angle and remove the battery from the battery bay
-
Turn the computer over, open the display, and press the power button for five seconds to ground the system board.
-
-
-
-
Close the display and turn the computer over.
-
Place the battery in the battery bay and snap the battery into place.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Eine weitere Person hat diese Anleitung absolviert.
Team
RampUP America, Inc. Mitglied von RampUP America, Inc.
Community
43 Mitglieder
1.985 Anleitungen geschrieben
