Einleitung

Accessing the RAM in this laptop is fairly simple and requires little disassembly.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. To prevent injury, make sure the laptop is unplugged before removing the battery.
    • To prevent injury, make sure the laptop is unplugged before removing the battery.

    • Flip the laptop over, bottom-side up.

  2. Push the switch next to the battery.
    • Push the switch next to the battery.

    • At the same time, lift the battery away from the laptop.

  3. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  4. Unscrew two 4 mm Philips #00 screws.
    • Unscrew two 4 mm Philips #00 screws.

    • Remove the RAM door panel.

  5. Pull the tabs located at red circles apart in order to separate the ram from its housing.
    • Pull the tabs located at red circles apart in order to separate the ram from its housing.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Kenneth Odum

Mitglied seit: 23.09.2014

505 Reputation

4 Anleitungen geschrieben

Team

USF Tampa, Team 11-1, Blackwell Fall 2014 Mitglied von USF Tampa, Team 11-1, Blackwell Fall 2014

USFT-BLACKWELL-F14S11G1

5 Mitglieder

7 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 3

Letzte 30 Tage: 8

Insgesamt: 902