Einleitung
This guide requires a Phillips #00 screwdriver
Was du brauchst
-
-
Slide the battery-lock tab and hold.
-
Flip the battery away from the chassis to remove it.
-
-
-
-
Undo the screw on the Mini-PCI card cover labeled "C"
-
Remove the panel from the chassis.
-
-
-
Use your fingertips to carefully spread apart the white plastic tabs.
-
Flip the Mini-PCI card up at a 45 degree angle.
-
Remove the card from the computer by sliding out diagonally
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Eine weitere Person hat diese Anleitung absolviert.