Einleitung

Upgrade or replace the ram in your Dell Inspiron 9300

    • Flip the computer over and place it on a clean level surface.

    • Loosen the screws using a #0 Phillips screw driver.

    • It is strongly recommended that the Anti-Static Wrist Strap is used to avoid damage to internal components.

    • The screws are secured by retainer clips in the plastic panel and are not fully removable.

  1. Remove the plastic panel.
    • Remove the plastic panel.

  2. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
    • Carefully pry away the retaining clips on either side of the ram modules using a spudger tool, until the card pops away from the motherboard.

    • Repeat for the second ram module if necessary.

  3. Carefully pull the ram modules out of it's slot, away from the motherboard.
    • Carefully pull the ram modules out of it's slot, away from the motherboard.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Randy McMillan

Mitglied seit: 21.09.2016

684 Reputation

4 Anleitungen geschrieben

Team

Master Techs Mitglied von Master Techs

Community

281 Mitglieder

792 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 1

Insgesamt: 128