Zum Hauptinhalt wechseln

Diese Version enthält möglicherweise inkorrekte Änderungen. Wechsle zur letzten geprüften Version.

Was du brauchst

  1. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 1, Bild 1 von 2 : Schritt 1, Bild 2 von 2
    • Remove all fourteen Phillips #0 7/16" screws from the bottom of the laptop.

    • Remove the two Phillips #0 5/16" screws from the bottom of the laptop.

  2. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 2, Bild 1 von 2 : Schritt 2, Bild 2 von 2
    • Turn the laptop over and open the lid.

    • Locate the three tabs above the first row of keys on the top of the keyboard, found above the F1, F6, and PrntScr keys.

    • With one of your hands, push the leftmost tab down with the plastic opening tool (above the F1 key). With your other hand, lift the left side of the keyboard.

    • Push the middle tab down with the plastic opening tool and continue lifting from the left side of the keyboard to the right side (above the F6 key).

    • Push the rightmost tab down with the plastic opening tool and continue lifting from the left side of the keyboard to the right side (above the PrntScr key). The keyboard should be loosened from the laptop after these steps.

  3. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 3, Bild 1 von 2 : Schritt 3, Bild 2 von 2
    • After the top edge of the keyboard is loose, pull up on the keyboard gently.

    • Do not pull the keyboard up forcefully as the keyboard is still attached to the laptop by a ribbon.

  4. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 4, Bild 1 von 3 : Schritt 4, Bild 2 von 3 : Schritt 4, Bild 3 von 3
    • Pull up the bottom side of the keyboard and locate the ribbon connecting the keyboard to the motherboard.

    • Locate the blue end of the ribbon which is connected to the motherboard.

    • Lift up the black flap on the connector and gently pull the ribbon away from the connector which is parallel to the motherboard.

    • Lift the keyboard up and off of the motherboard. Detach the blue end of the ribbon from the connector.

Ziellinie

4 weitere Nutzer:innen haben diese Anleitung absolviert.

Ryan Moelter

Mitglied seit: 04/17/14

382 Reputation

2 Anleitungen geschrieben

Team

Cal Poly, Team 3-44, Maness Spring 2014 Mitglied von Cal Poly, Team 3-44, Maness Spring 2014

CPSU-MANESS-S14S3G44

4 Mitglieder

6 Anleitungen geschrieben

2 Kommentare

Do you know any ways to replace 4 keys Spacebar,B,N and the Slash/Question Mark are broken plz help

Snapchat Hotdog - Antwort

The keyboard is best handled as a whole part replacement. You can find M5030 replacement keyboards for about $10 on Amazon/eBay.

Robert Johnson -

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 2

Letzte 7 Tage: 5

Letzte 30 Tage: 9

Insgesamt: 1,337