Einleitung

In this guide, we will be showing you how to remove and replace the Hard Drive.

    • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.

    • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

    • CAUTION: Hard drives are extremely fragile. Exercise care when handling the hard drive.

  1. Remove the four screws that secure the hard-drive assembly.
    • Remove the four screws that secure the hard-drive assembly.

    • Turn the computer over and lift the hard-drive assembly out of the hard-drive bay to disconnect the hard-drive assembly from the connector on the system board.

    • Pull the interposer to disconnect it from the hard drive.

    • Connect the interposer to the NEW hard drive.

    • Align the hard-drive assembly with the connector on the system board and press the hard-drive assembly into the hard-drive bay until it is fully seated.

    • Turn the computer over and replace the four screws that secure the hard-drive assembly.

Ziellinie

Ein weiterer Nutzer hat diese Anleitung absolviert.

Terrence15

Mitglied seit 18.12.2017

70.258 Reputation

442 Anleitungen geschrieben

Team

Informative Technologies Inc. Mitglied von Informative Technologies Inc.

Community

15 Mitglieder

925 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 11

Letzte 30 Tage: 35

Insgesamt: 256