Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Einleitung

If the fan isn't working properly, the laptop can overheat. This guide will show users how to replace the fan.

  1. Push the tabs on the left and right of the battery out towards the edge of the case. Push the tabs on the left and right of the battery out towards the edge of the case.
    • Push the tabs on the left and right of the battery out towards the edge of the case.

  2. While still pushing in the tabs, using your pinky finger, lift the battery out of the laptop.
    • While still pushing in the tabs, using your pinky finger, lift the battery out of the laptop.

  3. Push the button in on the CD/DVD drive to eject the drive. Push the button in on the CD/DVD drive to eject the drive.
    • Push the button in on the CD/DVD drive to eject the drive.

  4. Nintendo Switch Kits

    Eine schnelle Lösung, um wieder ins Spiel zu kommen

    Switch Kits kaufen

    Nintendo Switch Kits

    Eine schnelle Lösung, um wieder ins Spiel zu kommen

    Switch Kits kaufen
  5. Slide the drive out of the laptop. When removing the drive, keep it flat to prevent damage to anything inside the laptop.
    • Slide the drive out of the laptop.

    • When removing the drive, keep it flat to prevent damage to anything inside the laptop.

  6. Using the screwdriver, remove seven 4mm Phillips #1 screws from the bottom of the laptop. Using the screwdriver, remove two 9mm Phillips #00 screws from the bottom of the laptop.
    • Using the screwdriver, remove seven 4mm Phillips #1 screws from the bottom of the laptop.

    • Using the screwdriver, remove two 9mm Phillips #00 screws from the bottom of the laptop.

  7. Gently lift the back plate off of the laptop making sure all of the tabs on the inside perimeter of the back plate are unhooked before lifting. Be careful when removing the backplate. Lifting the backplate while the tabs are still hooked in will result in broken tabs.
    • Gently lift the back plate off of the laptop making sure all of the tabs on the inside perimeter of the back plate are unhooked before lifting.

    • Be careful when removing the backplate. Lifting the backplate while the tabs are still hooked in will result in broken tabs.

  8. Using the screwdriver, remove four 10mm Phillips #0 spring screws from the fan assembly. Using the screwdriver, remove four 10mm Phillips #0 spring screws from the fan assembly.
    • Using the screwdriver, remove four 10mm Phillips #0 spring screws from the fan assembly.

  9. Use the plastic opening tool to unclip the connector. Use the plastic opening tool to unclip the connector.
    • Use the plastic opening tool to unclip the connector.

  10. Lift the fan out of the laptop.
    • Lift the fan out of the laptop.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer haben diese Anleitung absolviert.

Madysen Eames

Mitglied seit: 27.02.2018

1.293 Reputation

7 Anleitungen geschrieben

Team

UMass Dartmouth, Team S2-G3, Simcock Spring 2018 Mitglied von UMass Dartmouth, Team S2-G3, Simcock Spring 2018

UMASSD-SIMCOCK-S18S2G3

3 Mitglieder

7 Anleitungen geschrieben

very good explanatory steps. but you did not talk about the application of thermal paste for reassembly

Godwin Nwachukwu - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 4

Letzten 7 Tage: 10

Letzten 30 Tage: 30

Insgesamt: 847