Ersatzteile

Kein Ersatzteil erforderlich.

  1. Make sure the Dell Latitude X300 power is off.
    • Make sure the Dell Latitude X300 power is off.

    • Remove the battery located on the bottom of the device by pushing in both clips.

  2. Remove rubber caps on each corner of the front screen with a pinch. Remove the 4 mm screws located on the front screen of the laptop.
    • Remove rubber caps on each corner of the front screen with a pinch.

    • Remove the 4 mm screws located on the front screen of the laptop.

  3. Kostenloser Versand für alle Bestellungen über 100,00 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  4. Carefully, remove the screen casing using either your hands or a proper tool.
    • Carefully, remove the screen casing using either your hands or a proper tool.

    • The casing is very flimsy, so extreme care is required.

  5. Remove the 4 mm screws on the bottom left and bottom right corner of the screen.
    • Remove the 4 mm screws on the bottom left and bottom right corner of the screen.

  6. Carefully lift the screen and place it on it's face. Disconnect the wiring attached to the screen.
    • Carefully lift the screen and place it on it's face.

    • Disconnect the wiring attached to the screen.

    • It is important not to damage this wire.

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer haben diese Anleitung absolviert.

Jacob

Mitglied seit: 12.03.2014

9 Reputation

2 Anleitungen geschrieben

Team

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 3

Insgesamt: 490