Zum Hauptinhalt wechseln

Diese Version enthält möglicherweise inkorrekte Änderungen. Wechsle zur letzten geprüften Version.

Was du brauchst

  1. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 1, Bild 1 von 1
    • Make sure the Dell Latitude X300 power is off.

    • Remove the battery located on the bottom of the device by pushing in both clips.

  2. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 2, Bild 1 von 2 : Schritt 2, Bild 2 von 2
    • Remove rubber caps on each corner of the front screen with a pinch.

    • Remove the 4 mm screws located on the front screen of the laptop.

  3. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 3, Bild 1 von 1
    • Carefully, remove the screen casing using either your hands or a proper tool.

    • The casing is very flimsy, so extreme care is required.

  4. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 4, Bild 1 von 1
    • Remove the 4 mm screws on the bottom left and bottom right corner of the screen.

  5. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 5, Bild 1 von 2 : Schritt 5, Bild 2 von 2
    • Carefully lift the screen and place it on it's face.

    • Disconnect the wiring attached to the screen.

    • It is important not to damage this wire.

Ziellinie

3 weitere Nutzer:innen haben diese Anleitung absolviert.

Jacob

Mitglied seit: 03/12/14

9 Reputation

2 Anleitungen geschrieben

Team

UMass Dartmouth, Team 6-1, Vijaybhaskar Spring 2014 Mitglied von UMass Dartmouth, Team 6-1, Vijaybhaskar Spring 2014

UMASSD-VIJAYBHASKAR-S14S6G1

4 Mitglieder

2 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 2

Letzte 7 Tage: 6

Letzte 30 Tage: 6

Insgesamt: 709