Zum Hauptinhalt wechseln

Ersatzteile

Keine Ersatzteile angegeben.

  1. Power down your PC and remove the power cord from the back. Power down your PC and remove the power cord from the back.
    • Power down your PC and remove the power cord from the back.

  2. Press and hold the power button for about 10 seconds, then release. This helps drain any remaining power stored in the capacitors, so that you can safely work on the internal components.
    • Press and hold the power button for about 10 seconds, then release.

    • This helps drain any remaining power stored in the capacitors, so that you can safely work on the internal components.

  3. With the computer standing upright, firmly pull on the tab at the back of the computer.
    • With the computer standing upright, firmly pull on the tab at the back of the computer.

    • When the side panel pops free, gently pull the panel away from the computer.

    • If you have trouble freeing the side panel from the case, you may need to pull the tab a bit harder.

  4. Remove the SATA power and data cables. SATA Power SATA Data
    • Remove the SATA power and data cables.

    • SATA Power

    • SATA Data

  5. Laptop-Akkus

    Wenig Aufwand, große Wirkung.

    Jetzt kaufen

    Laptop-Akkus

    Wenig Aufwand, große Wirkung.

    Jetzt kaufen
  6. Unplug the power and data cables. Unplug the power and data cables. Unplug the power and data cables.
    • Unplug the power and data cables.

  7. Unplug the fan. Unplug the fan.
    • Unplug the fan.

  8. Remove the two Phillips #2 screws. Remove the two Phillips #2 screws.
    • Remove the two Phillips #2 screws.

  9. Pull the heat sink up. Pull the heat sink up. Pull the heat sink up.
    • Pull the heat sink up.

  10. Pull the two tabs and pull it out. This needs a lot of force to take it off. This needs a lot of force to take it off.
    • Pull the two tabs and pull it out.

    • This needs a lot of force to take it off.

  11. Remove the one Phillips #2. Remove the Data cable.
    • Remove the one Phillips #2.

    • Remove the Data cable.

    • Taking this cable off will brake some of the plastic thats locking it in. But you can still plug the cable back in.

  12. Remove the one Phillips #2 screw. Now you can replace it with a new one.
    • Remove the one Phillips #2 screw.

    • Now you can replace it with a new one.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Padraic Hoselton

Mitglied seit: 22.08.2017

3.017 Reputation

13 Anleitungen geschrieben

Team

Master Techs Mitglied von Master Techs

Community

287 Mitglieder

811 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 3

Letzte 7 Tage: 7

Letzte 30 Tage: 14

Insgesamt: 404