Einleitung
Replace the Dead Battery on the Motherboard
Was du brauchst
-
-
Lay the computer on its side; you will see a blue knob.
-
Turn this knob 90 deg clockwise.
-
-
-
Slide the panel case forward about 1/2 inch while knob is turned.
-
Lift panel case off computer.
-
-
-
Unplug the blue cable that connects the hard drive to the motherboard.
-
-
-
-
Unplug the power supply, distinguished by its red and yellow wires (yellow wire obscured from view).
-
-
-
Under the hard drive, there is a circular, silver battery connected to the motherboard.
-
Use a spudger to gently pry the battery from the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
10 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
Cal Poly, Team 22-4, Maness Fall 2010 Mitglied von Cal Poly, Team 22-4, Maness Fall 2010
CPSU-MANESS-F10S22G4
4 Mitglieder
26 Anleitungen geschrieben
Ein Kommentar
that particular battery holder looked hard to get out- no pop out lever, thought i’d break it gouging it out!
