Ersatzteile

Kein Ersatzteil erforderlich.

Slide the release latch to unlock the battery.
  • Slide the release latch to unlock the battery.

    • Flip and remove the battery from the computer.

Kommentar hinzufügen

Remove the screws that secure the base cover to the computer. Press the rubber tabs towards the rear of the computer to disengage the base cover.
  • Remove the screws that secure the base cover to the computer. Press the rubber tabs towards the rear of the computer to disengage the base cover.

    • Flip and remove the base cover from the computer.

Kommentar hinzufügen

  • Remove the screws that secure the hard drive to the computer. Slide the hard -drive latch to the unlock position and pull out the hard drive from the computer.

Kommentar hinzufügen

  • Flex the hard-drive bracket outward and pull out the hard drive from the bracket.

  • NOTE: A rubber filler is installed to the hard-drive bracket for 7 mm hard drives. It is designed to prevent vibrations and for correct installation of the 7 mm hard drives. 9 mm hard drives do not require the filler when installed into the hard-drive bracket.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Johnathan Hammond

Mitglied seit 28.02.2018

35.419 Reputation

408 Anleitungen geschrieben

Team

Informative Technologies Inc. Mitglied von Informative Technologies Inc.

Community

15 Mitglieder

917 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 1

Letzte 7 Tage: 3

Letzte 30 Tage: 19

Insgesamt: 103