Loosen the M2.5x2+3.5 captive screws that secure the base cover to the computer [1].
  • Loosen the M2.5x2+3.5 captive screws that secure the base cover to the computer [1].

    • Pry the base cover from the edge [2].

    • Lift the base cover away from the computer

Kommentar hinzufügen

Disconnect the battery cable from the connector on the system board [1].
  • Disconnect the battery cable from the connector on the system board [1].

    • Remove the M2x3L screws that secure the battery to the computer [2].

WIth what screwdriver?

John - Antwort

  • Pry the clips securing the memory module until the memory pops-up [1]

    • Lift the memory module away from the connector [2].

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Mitglied seit 28.02.2018

35.455 Reputation

408 Anleitungen geschrieben

Team

Informative Technologies Inc. Mitglied von Informative Technologies Inc.

Community

15 Mitglieder

917 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 4

Insgesamt: 27