Zum Hauptinhalt wechseln

Diese Version enthält möglicherweise inkorrekte Änderungen. Wechsle zur letzten geprüften Version.

Was du brauchst

  1. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 1, Bild 1 von 1
    • Slide both battery latches to the open position.

    • Slide the battery out of the battery bay.

  2. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 2, Bild 1 von 1
    • Loosen the five screws that secure the hard-drive compartment cover.

    • Remove the cover and set it aside.

  3. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 3, Bild 1 von 1
    • Remove the three screws that secure the hard drive to the computer.

    • One screw is attached to a metal tab on the metal base of the hard drive, and the other two screws are attached to the metal base.

    • Disconnect the hard drive cable connector from the motherboard.

    • Pull the mylar tab to release the hard drive.

    • Lift the hard drive and the hard drive cable out of the computer. You may find it easier to lift the hard drive starting from the side located opposite from the hard drive's connection to the hard drive cable.

Ziellinie

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Johnathan Hammond

Mitglied seit: 02/28/18

44.953 Reputation

408 Anleitungen geschrieben

Team

RampUP America, Inc. Mitglied von RampUP America, Inc.

Community

42 Mitglieder

1.985 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 7

Letzte 30 Tage: 12

Insgesamt: 610