Ersatzteile

Kein Ersatzteil erforderlich.

  1. Slide the release latches to unlock the battery.
    • Slide the release latches to unlock the battery.

  2. Slide the battery and remove it from the computer.
    • Slide the battery and remove it from the computer.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

  3. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  4. Remove the screws that secure the access panel to the base of the computer.
    • Remove the screws that secure the access panel to the base of the computer.

  5. Lift the access panel up at an angle and remove it from the computer.
    • Lift the access panel up at an angle and remove it from the computer.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

  6. Pry the retention clips away from the memory module until it pops up.
    • Pry the retention clips away from the memory module until it pops up.

  7. Remove the memory module from its connector on the system board.
    • Remove the memory module from its connector on the system board.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Mitglied seit: 28.02.2018

35.786 Reputation

408 Anleitungen geschrieben

Team

Informative Technologies Inc. Mitglied von Informative Technologies Inc.

Community

15 Mitglieder

925 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 2

Insgesamt: 21