Ersatzteile

Kein Ersatzteil erforderlich.

  1. Remove the screws that secure the base cover to the computer.
    • Remove the screws that secure the base cover to the computer.

    Kommentar hinzufügen

  2. Pry the base cover along the edges to loosen it.
    • Pry the base cover along the edges to loosen it.

    Kommentar hinzufügen

    • Lift and remove the base cover from the computer.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

    Kommentar hinzufügen

    • Disconnect the battery cable from its connector on the system board.

    Kommentar hinzufügen

    • Release the tabs that secure the battery in the battery bay.

    Kommentar hinzufügen

    • Lift and remove the battery from the computer.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

    Kommentar hinzufügen

    • Pry the retention clips away from the memory module until it pops up. Remove the memory module from its connector on the system board.

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Mitglied seit 28.02.2018

35.671 Reputation

408 Anleitungen geschrieben

Team

Informative Technologies Inc. Mitglied von Informative Technologies Inc.

Community

15 Mitglieder

925 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 1

Letzte 7 Tage: 1

Letzte 30 Tage: 5

Insgesamt: 66