Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Einleitung

In this guide, we will be showing you how to remove the Solid-State Drive.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Turn the computer over.
    • Turn the computer over.

    • Slide the battery-bay release latch and the battery-lock latch towards the outer edges.

    • Slide the battery out of the battery bay.

    • Turn the computer top-side up, open the display, and press the power button to ground the system board.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

  2. Remove the two screws on the module cover.
    • Remove the two screws on the module cover.

  3. Das Essential Toolkit

    Die nützlichsten Werkzeuge in unserem kompaktesten Kit.

    Jetzt kaufen

    Das Essential Toolkit

    Die nützlichsten Werkzeuge in unserem kompaktesten Kit.

    Jetzt kaufen
  4. Lift the cover off the computer at an angle as shown in the figure.
    • Lift the cover off the computer at an angle as shown in the figure.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

  5. Remove the two screws that secure the solid-state drive.
    • Remove the two screws that secure the solid-state drive.

    • Lift the solid-state drive out of its system board connector.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Ziellinie

Ein weiterer Nutzer hat diese Anleitung absolviert.

Johnathan Hammond

Mitglied seit: 28.02.2018

37.484 Reputation

408 Anleitungen geschrieben

Team

Informative Technologies Inc. Mitglied von Informative Technologies Inc.

Community

25 Mitglieder

1.823 Anleitungen geschrieben

Remember the add the Warning steps that are found in the Service Manuals at the beginning of the guides.

Terrence15 - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 1

Letzten 7 Tage: 1

Letzten 30 Tage: 3

Insgesamt: 63