Einleitung
In this guide, we will be showing you how to remove the Solid-State Drive.
Was du brauchst
-
-
Turn the computer over.
-
Slide the battery-bay release latch and the battery-lock latch towards the outer edges.
-
Slide the battery out of the battery bay.
-
Turn the computer top-side up, open the display, and press the power button to ground the system board.
-
-
-
-
Lift the cover off the computer at an angle as shown in the figure.
-
-
-
Remove the two screws that secure the solid-state drive.
-
Lift the solid-state drive out of its system board connector.
-
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.
Ein Kommentar
Remember the add the Warning steps that are found in the Service Manuals at the beginning of the guides.