Zum Hauptinhalt wechseln

Dell XPS 15 9550 Back/Underside Panel Replacement

Was du brauchst

  1. Dell XPS 15 9550 Back/Underside Panel Replacement, Back/Underside Panel: Schritt 1, Bild 1 von 1
    • Turn the laptop upside down.

    • Make sure the laptop is turned off.

    • Using a T5 Torx Screwdriver, remove the ten 3 mm long screws from the perimeter of the back of the laptop.

  2. Dell XPS 15 9550 Back/Underside Panel Replacement: Schritt 2, Bild 1 von 2 Dell XPS 15 9550 Back/Underside Panel Replacement: Schritt 2, Bild 2 von 2
    • Open up the information panel door (on the middle of the back side).

    • While holding the door open, use a Phillips #00 Screwdriver to remove the two 10 mm long screws.

  3. Dell XPS 15 9550 Back/Underside Panel Replacement: Schritt 3, Bild 1 von 3 Dell XPS 15 9550 Back/Underside Panel Replacement: Schritt 3, Bild 2 von 3 Dell XPS 15 9550 Back/Underside Panel Replacement: Schritt 3, Bild 3 von 3
    • Carefully lift the 2 corners of the back panel close to the hinge upwards, releasing the whole panel.

    • Do not force the panel off. If it does not come off easily, try using a plastic spudger where it is stuck.

Abschluss

To reassemble your device, follow these instructions in reverse order.

12 weitere Nutzer:innen haben diese Anleitung absolviert.

Brandon Schmidt

Mitglied seit: 10/04/18

2.090 Reputation

3 Anleitungen geschrieben

Team

UW Stout, Team S6-G1, Ogden Fall 2018 Mitglied von UW Stout, Team S6-G1, Ogden Fall 2018

UWSTOUT-OGDEN-F18S6G1

4 Mitglieder

23 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 3

Letzte 7 Tage: 21

Letzte 30 Tage: 101

Insgesamt: 12,396