Einleitung

This guide will allow readers to replace the filter on their Dirt Devil Scorpion Quick Flip hand vacuum. There are several reasons to replace a filter. It may be too dirty to clean, punctured, or otherwise broken.

  1. Press the button on the handle of the vacuum to trigger the release mechanism.
    • Press the button on the handle of the vacuum to trigger the release mechanism.

    • This should allow the front part of the vacuum to detach from the back half of the unit as pictured here.

    Kommentar hinzufügen

  2. Kostenloser Versand bei Bestellungen über 20 $
    Verwende den Code BLUEANDBLACK an der Kasse
    Kostenloser Versand bei Bestellungen über 20 $
    Verwende den Code BLUEANDBLACK
  3. Once the front module has been detached, identify the filter within the front module.
    • Once the front module has been detached, identify the filter within the front module.

    • Firmly grasp the filter. Pull it out of the front module. Examine the filter to see if it is broken and needs to be replaced or if it is only dirty and clogged.

    • If the filter does not need to be replaced, clean the filter using running water or compressed air.

    Kommentar hinzufügen

    • Rotate the filter counterclockwise to remove it from the plastic holdings.

    • Replace with the new filter.

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Joseph Warner

Mitglied seit 11.11.2017

201 Reputation

2 Anleitungen geschrieben

Team

IUPUI, Team S1-G1, Wilson Fall 2017 Mitglied von IUPUI, Team S1-G1, Wilson Fall 2017

IUPUI-WILSON-F17S1G1

4 Mitglieder

2 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 4

Letzte 30 Tage: 15

Insgesamt: 194