Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Einleitung

Use this guide to replace the brush roller on your Dirt Devil Vibe vacuum when the brush on your vacuum stops spinning or spins too slowly. You will need a #0 phillips-head screwdriver to complete this replacement. Make sure the vacuum is unplugged before starting the replacement process for safety purposes. Make sure to keep track of all screws that will be removed during the replacement process.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Lay the vacuum so it's facing up. Lay the vacuum so it's facing up.
    • Lay the vacuum so it's facing up.

  2. Use a Phillips #0 screwdriver to remove each screw.
    • Use a Phillips #0 screwdriver to remove each screw.

  3. Manta Precision Bit Set

    112 Bits für jede Reparatur.

    Upgrade Your Toolbox

    Manta Precision Bit Set

    Upgrade Your Toolbox
  4. After removing all of the screws pull  the vacuum's black cover up to remove it. After removing all of the screws pull  the vacuum's black cover up to remove it. After removing all of the screws pull  the vacuum's black cover up to remove it.
    • After removing all of the screws pull the vacuum's black cover up to remove it.

  5. Pull the brush roll  up  to remove from the black cover. Pull the brush roll  up  to remove from the black cover.
    • Pull the brush roll up to remove from the black cover.

  6. Replace the brush roll with a new brush roll.
    • Replace the brush roll with a new brush roll.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Michell Lopez

Mitglied seit: 09.10.2019

121 Reputation

1 Anleitung geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 1

Letzten 7 Tage: 3

Letzten 30 Tage: 30

Insgesamt: 117