Zum Hauptinhalt wechseln

Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.

Disassembling Acer Aspire 5100 laptop Removing DVD drive

Was du brauchst

    • Find the sliding tab with a small battery symbol next to it. Push the tab to the left to eject the battery

    • Remove the 4 screws securing the large cover on the upper right hand side.

    • Carefully remove the cover from where the screws were. You will see the fan on the top right corner.

    • Turn over the laptop so the back of it is facing up. There are several components you want to remove. Start with the largest component. Get your screw driver and remove the screws holding the component in place. Then slowly lift off the component to expose the RAM.

    • Use a flathead screw driver to remove the one screw securing the DVD drive.

    • Push out the DVD drive.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer:innen haben diese Anleitung absolviert.

luis

Mitglied seit: 04/21/10

167 Reputation

1 Anleitung geschrieben

Team

Cal Poly, Team 18-66, Johann Spring 2010 Mitglied von Cal Poly, Team 18-66, Johann Spring 2010

CPSU-JOHANN-S10S18G66

5 Mitglieder

1 Anleitung geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 4

Letzte 30 Tage: 7

Insgesamt: 2,775