Einleitung

This is a step-by-step guide to remove the outer case on the AirPort Extreme Model A1034.

Ersatzteile

Kein Ersatzteil erforderlich.

Remove the three 14.3mm T7 Torx screws from the bottom of AirPort.
  • Remove the three 14.3mm T7 Torx screws from the bottom of AirPort.

Kommentar hinzufügen

Remove the 5.1mm Phillips screw from the bottom of the AirPort. This screw is located under the identification sticker. You will have to remove the sticker or make a hole to remove it.
  • Remove the 5.1mm Phillips screw from the bottom of the AirPort. This screw is located under the identification sticker. You will have to remove the sticker or make a hole to remove it.

Kommentar hinzufügen

  • Lift the bottom and top casing straight apart and then lift metal casing straight up from the bottom plastic casing.

Kommentar hinzufügen

  • Unplug the black connector on the top of the metal casing by gently pulling horizontally.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer haben diese Anleitung absolviert.

Travis Go

Mitglied seit 12.10.2011

158 Reputation

2 Anleitungen geschrieben

Team

Cal Poly, Team 17-15, Regan Fall 2011 Mitglied von Cal Poly, Team 17-15, Regan Fall 2011

CPSU-REGAN-F11S17G15

3 Mitglieder

7 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 3

Insgesamt: 2,506