Einleitung

How to open it for repairs or battery swap

The lamp opens up at the base: there are two smaller tabs next to the button, the semi-transparent plasic can be pressed in a bit with a knife, put a bit of paper inbetween to prevent the clip from snapping back. Next go with a knife towards one of the large tabs on the side until one side snaps out. Repeat for other side. The lamp opens up at the base: there are two smaller tabs next to the button, the semi-transparent plasic can be pressed in a bit with a knife, put a bit of paper inbetween to prevent the clip from snapping back. Next go with a knife towards one of the large tabs on the side until one side snaps out. Repeat for other side. The lamp opens up at the base: there are two smaller tabs next to the button, the semi-transparent plasic can be pressed in a bit with a knife, put a bit of paper inbetween to prevent the clip from snapping back. Next go with a knife towards one of the large tabs on the side until one side snaps out. Repeat for other side.
  • The lamp opens up at the base: there are two smaller tabs next to the button, the semi-transparent plasic can be pressed in a bit with a knife, put a bit of paper inbetween to prevent the clip from snapping back. Next go with a knife towards one of the large tabs on the side until one side snaps out. Repeat for other side.

Kommentar hinzufügen

Remove the 4 screws (warning: 2x2 different types), out comes the pcb. Detach battery connector at the back. Remove the 4 screws (warning: 2x2 different types), out comes the pcb. Detach battery connector at the back. Remove the 4 screws (warning: 2x2 different types), out comes the pcb. Detach battery connector at the back.
  • Remove the 4 screws (warning: 2x2 different types), out comes the pcb. Detach battery connector at the back.

Kommentar hinzufügen

remove two more screws to get at the battery remove two more screws to get at the battery remove two more screws to get at the battery
  • remove two more screws to get at the battery

Kommentar hinzufügen

Overview of parts
  • Overview of parts

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

4 weitere Nutzer haben diese Anleitung absolviert.

petur

Mitglied seit 23.07.2011

178 Reputation

2 Anleitungen geschrieben

I think it is easier to open the lamp by pressing the semi-transparent part at the opposite side of the button.

Matthieu Morel - Antwort

How can I open the lamp??? Please post a photo of how are u using the knife because I can't!!!

Alberto Santaella Gallego - Antwort

you need to press the clips inward, the picture shows where the clips are. Slide inbetween and press

petur - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 1

Letzte 7 Tage: 2

Letzte 30 Tage: 12

Insgesamt: 1,742