Repariere deine Sachen Community Store

Disassembling Black and Decker BL3000S Blender Base

Einleitung

As a first step to clean, maintain, or install new parts (excluding the blender blades) for the Black and Decker BL3000S the blender base must be taken apart. This guide will provide step by step instructions of how to perform this task.

Was du brauchst

  1. Disassembling Black and Decker BL3000S Blender Base, Blender Base: Schritt 1, Bild 1 von 2 Disassembling Black and Decker BL3000S Blender Base, Blender Base: Schritt 1, Bild 2 von 2

    • Before disassembling the blender base, make sure the blender disconnected from any power outlet.

    • Lift the jar straight up from the base without tilting the jar.

    Bearbeiten

  2. Disassembling Black and Decker BL3000S Blender Base: Schritt 2, Bild 1 von 1

    • Remove the top three 1/4 inch base screws using a Philip's head screwdriver.

    Bearbeiten

  4. Disassembling Black and Decker BL3000S Blender Base: Schritt 3, Bild 1 von 2 Disassembling Black and Decker BL3000S Blender Base: Schritt 3, Bild 2 von 2

    • Remove the two base leg covers next to the power cord using pliers or a flat-head screwdriver.

    • This provides access to the base screws beneath.

    Bearbeiten

  5. Disassembling Black and Decker BL3000S Blender Base: Schritt 4, Bild 1 von 1

    • Remove the following screws that secure the top and bottom halves of the base.

    • One 1/4 Phillips screw

    • One TA-20 screw

    • Both screwdrivers must have a minimum of a three inch shank (length).

    • Screwdrivers with extenders will not fit down the access holes.

    Bearbeiten

  6. Disassembling Black and Decker BL3000S Blender Base: Schritt 5, Bild 1 von 1

    • Lift the top half of the base from the bottom half of the base to reveal the internal mechanism.

    Bearbeiten
Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Autor:in

mit 3 anderen Mitwirkenden

Andrew

Mitglied seit: 10/04/12

209 Reputation

4 Anleitungen geschrieben

Auszeichnungen: 10

+ 7 weitere Auszeichnungen

Team

Cal Poly, Team 6-34, Regan Fall 2012 Mitglied von Cal Poly, Team 6-34, Regan Fall 2012

CPSU-REGAN-F12S6G34

4 Mitglieder

6 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 7

Letzte 7 Tage: 28

Letzte 30 Tage: 56

Insgesamt: 7,662