Zum Hauptinhalt wechseln

Disassembling Dell Inspiron One 2020 Back Cover

Was du brauchst

  1. Disassembling Dell Inspiron One 2020 Back Cover, Back Cover: Schritt 1, Bild 1 von 3 Disassembling Dell Inspiron One 2020 Back Cover, Back Cover: Schritt 1, Bild 2 von 3 Disassembling Dell Inspiron One 2020 Back Cover, Back Cover: Schritt 1, Bild 3 von 3
    • Place the all in one computer face down on a soft, clean surface to avoid scratching the front.

    • Press the tab on the stand cover and lift up.

  2. Disassembling Dell Inspiron One 2020 Back Cover: Schritt 2, Bild 1 von 3 Disassembling Dell Inspiron One 2020 Back Cover: Schritt 2, Bild 2 von 3 Disassembling Dell Inspiron One 2020 Back Cover: Schritt 2, Bild 3 von 3
    • Remove the four phillips screws that attach the stand to the computer.

    • Tilt the stand up and out.

  3. Disassembling Dell Inspiron One 2020 Back Cover: Schritt 3, Bild 1 von 3 Disassembling Dell Inspiron One 2020 Back Cover: Schritt 3, Bild 2 von 3 Disassembling Dell Inspiron One 2020 Back Cover: Schritt 3, Bild 3 von 3
    • Starting from the optical drive, pry the back cover up with a plastic spudger.

    • The cover is held in place by fragile plastic clips. Careful to not break them.

Abschluss

To reassemble your device, follow these instructions in reverse order.

28 weitere Nutzer:innen haben diese Anleitung absolviert.

Tyler

Mitglied seit: 06/19/12

4.920 Reputation

16 Anleitungen geschrieben

Team

TechForce Mitglied von TechForce

Business

2 Mitglieder

25 Anleitungen geschrieben

Ein Kommentar

I took the back cover off because everytime i connected the power cable the blue light on the power cable would go out and in taking off the back cover i might find something obvious. I did not find anything obvious except for a plastic clip floating around by itself. this may be the cause to a short i am thinking. Any ideas?

kim - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 12

Letzte 30 Tage: 54

Insgesamt: 33,789