Einleitung

This is a guide to take part the shell of the base from the logic board. After completing this guide, you will have access to the logic board and all other interior parts of the telephone.

Ersatzteile

Kein Ersatzteil erforderlich.

Unplug the device before proceeding.
  • Unplug the device before proceeding.

  • Remove the phone cord from the phone jack from the base of the headset.

    • Use a plastic opening tool to remove the phone cord.

Kommentar hinzufügen

Remove the phone cord screw cap.
  • Remove the phone cord screw cap.

    • Unscrew the 7.5mm screw.

    • Remove the screw cap.

  • Remove the cord from the phone base.

Kommentar hinzufügen

  • Use finger to remove the battery cover.

Kommentar hinzufügen

  • Remove the Volume Dial by gently grasping the dial and pulling away from the base.

Kommentar hinzufügen

  • Remove the 6 screws from the base shell.

    • Remove the 3 12mm screws with the Philips head #1 screw driver.

    • Remove the 3 18mm screws with the Philips head #1 screw driver.

Kommentar hinzufügen

  • Pry off the base shell using a Plastic Opener Tool.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Alles Rebel

Mitglied seit 20.09.2012

63 Reputation

3 Anleitungen geschrieben

Team

Cal Poly, Team 16-59, Forte Fall 2012 Mitglied von Cal Poly, Team 16-59, Forte Fall 2012

CPSU-FORTE-F12S16G59

4 Mitglieder

8 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 615