Repariere deine Sachen Community Store

Griffin iFM 4027 Right Side Panel Replacement

Einleitung

A side panel is located on each side of the device. The right side panel, containing the button(s), controls the track being selected as well as the volume of the device. There are no prerequisites required for this guide.

  • A plastic pry bar is necessary to remove the panel.

Was du brauchst

  1. Griffin iFM 4027 Right Side Panel Replacement, Right Side Panel: Schritt 1, Bild 1 von 1
    In diesem Schritt verwendetes Werkzeug:
    iFixit Opening Tool
    $1.99
    Kaufen

    • First, lodge the tip of the plastic iFixit opening tool into the top corner of the device.

    • Apply pressure upward with the iFixit Opening Tool. This should release the two panels away from each other.

    Bearbeiten

  3. Griffin iFM 4027 Right Side Panel Replacement: Schritt 2, Bild 1 von 3 Griffin iFM 4027 Right Side Panel Replacement: Schritt 2, Bild 2 von 3 Griffin iFM 4027 Right Side Panel Replacement: Schritt 2, Bild 3 von 3

    • Use your fingers to separate the right side panel from the device.

    • Turn the panel over so that the outer edge is facing downward.

    • Use your fingers to dislodge the buttons, and then set them aside for later.

    Bearbeiten
Abschluss

To reassemble your device, follow these instructions in reverse order.

Autor:in

mit 9 anderen Mitwirkenden

Alexander

Mitglied seit: 03/09/12

101 Reputation

6 Anleitungen geschrieben

Auszeichnungen: 7

+ 4 weitere Auszeichnungen

Team

Clemson, Team 15-3, Benson Spring 2012 Mitglied von Clemson, Team 15-3, Benson Spring 2012

CLEM-BENSON-S12S15G3

3 Mitglieder

6 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 940