Repariere deine Sachen Community Store

Disassembling IBM WorkPad c3 Back Case

Einleitung

This guide will explain step by step how to remove the outer cases of the IBM WorkPad c3.

Was du brauchst

  1. Disassembling IBM WorkPad c3 Back Case, Back Case: Schritt 1, Bild 1 von 2 Disassembling IBM WorkPad c3 Back Case, Back Case: Schritt 1, Bild 2 von 2

    • Turn the device over so that the screen is facing down.

    • In the next step the device will be heated, so the screen must be turned over to prevent heat damage to the LCD/Digitizer.

    Bearbeiten

  3. Disassembling IBM WorkPad c3 Back Case: Schritt 2, Bild 1 von 1

    • Using a hair dryer, slowly heat the edges of the WorkPad.

    • Spend at least one minute heating each side of the device. This will melt the glue holding the case together, and allow it to be removed.

    • Be sure not to touch the device directly after heating as it will be extremely hot. Use a towel or oven mitt to grab it.

    Bearbeiten

  4. Disassembling IBM WorkPad c3 Back Case: Schritt 3, Bild 1 von 2 Disassembling IBM WorkPad c3 Back Case: Schritt 3, Bild 2 von 2

    • Use a plastic opening tool to pry the back case from the WorkPad.

    • If the rear cover is not coming off very easily, you probably need to reheat the case in order to sufficiently melt the glue.

    Bearbeiten
Abschluss

To reassemble your device, follow these instructions in reverse order.

Autor:in

mit 5 anderen Mitwirkenden

Emily Falkenstein

Mitglied seit: 10/05/10

75 Reputation

5 Anleitungen geschrieben

Auszeichnungen: 5

+ 2 weitere Auszeichnungen

Team

Cal Poly, Team 21-35, Regan Fall 2010 Mitglied von Cal Poly, Team 21-35, Regan Fall 2010

CPSU-REGAN-F10S21G35

3 Mitglieder

5 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 2

Letzte 30 Tage: 3

Insgesamt: 1,445