Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
These instructions will demonstrate how to remove the SD card slot from the KDDI Kyocera A5521K.
Was du brauchst
-
-
Turn the phone over to expose the battery cover.
-
Apply pressure to the back of the battery cover to slide it down.
-
The battery cover is now separate from the phone.
-
-
-
Remove the battery by pushing it up and out from the bottom.
-
The battery, cover, and phone should now be separated.
-
-
-
-
Remove the black, rubber screw caps towards the top of the back of the phone to reveal two additional screws.
-
Remove the two screws with a Y0 screwdriver.
-
-
-
Rotate the phone 180 degrees.
-
Carefully separate the back plate from the remainder of the phone.
-
The back plate should now be detached from the rest of the phone.
-
-
-
Rotate the phone approximately 45 degrees to the right.
-
Gently pry up the SD card slot with a spudger.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
Cal Poly, Team 28-25, Regan Spring 2010 Mitglied von Cal Poly, Team 28-25, Regan Spring 2010
CPSU-REGAN-S10S28G25
4 Mitglieder
20 Anleitungen geschrieben
