Einleitung

The Circuit board has the screen and microphone attached, but the speaker and antenna can be modified separately.

First, apply pressure with your thumb on the top of the battery cover.
  • First, apply pressure with your thumb on the top of the battery cover.

Kommentar hinzufügen

Next, pull down on the cover until it begins to slide.
  • Next, pull down on the cover until it begins to slide.

Kommentar hinzufügen

Mac • RAM-Erweiterungssets
Beschleunigen Sie Ihren Mac. Erweitern Sie seinen Speicher.
Mac • RAM-Erweiterungssets
Get more memory out of your Mac.
Finally, once the cover is completely off, pry up the old batteries with your finger or a strong, skinny tool (i.e. spudger).
  • Finally, once the cover is completely off, pry up the old batteries with your finger or a strong, skinny tool (i.e. spudger).

Kommentar hinzufügen

Unscrew the six 8.0 millimeter long, #0 screws on the backside of the case using the Phillips #0 screwdriver.
  • Unscrew the six 8.0 millimeter long, #0 screws on the backside of the case using the Phillips #0 screwdriver.

Kommentar hinzufügen

Detach back part of the case by gently lifting up.
  • Detach back part of the case by gently lifting up.

Kommentar hinzufügen

Remove the old or broken circuit board from the front case.
  • Remove the old or broken circuit board from the front case.

  • Clip the red and black wires at the base of the motherboard to completely separate it from the radio case.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer haben diese Anleitung absolviert.

James Tucker Dunn

Mitglied seit 18.01.2013

371 Reputation

6 Anleitungen geschrieben

Team

Cal Poly, Team 19-43, Regan Winter 2013 Mitglied von Cal Poly, Team 19-43, Regan Winter 2013

CPSU-REGAN-W13S19G43

3 Mitglieder

9 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 3

Insgesamt: 615