Zum Hauptinhalt wechseln

Motorola V180 Connector Ribbon Replacement

Was du brauchst

  1. Motorola V180 Connector Ribbon Replacement, Connector Ribbon: Schritt 1, Bild 1 von 1
    • Gently tug on the upper edge of the faceplate, and it will easily detach.

  2. Motorola V180 Connector Ribbon Replacement: Schritt 2, Bild 1 von 1
    • Remove the four screws securing the front cover.

  3. Motorola V180 Connector Ribbon Replacement: Schritt 3, Bild 1 von 1
    • Gently glide the metallic silver cover outward.

    • This piece is wedged in tight. Try to slide out one hook at a time, instead of both simultaneously.

  4. Motorola V180 Connector Ribbon Replacement: Schritt 4, Bild 1 von 1
    • Insert a pair of tweezers between the silver and black sections of the cover.

    • The silver section should now easily snap away.

  5. Motorola V180 Connector Ribbon Replacement: Schritt 5, Bild 1 von 1
    • The black rubber component can now easily be taken off.

  6. Motorola V180 Connector Ribbon Replacement: Schritt 6, Bild 1 von 1
    • Use a soldering iron to detach the connector ribbon from the phone.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tyler Knisley

Mitglied seit: 05/07/10

1 Reputation

7 Anleitungen geschrieben

Team

Cal Poly, Team 6-16, Maness Spring 2010 Mitglied von Cal Poly, Team 6-16, Maness Spring 2010

CPSU-MANESS-S10S6G16

4 Mitglieder

13 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 2

Insgesamt: 2,613