Ersatzteile

Kein Ersatzteil erforderlich.

  1. Remove the screws from the bottom, right, and left side of camera. Remove the screws from the bottom, right, and left side of camera. Remove the screws from the bottom, right, and left side of camera.
    • Remove the screws from the bottom, right, and left side of camera.

  2. Remove the back of the camera, may require force.
    • Remove the back of the camera, may require force.

  3. Unscrew the right metal bracket of the viewing lens
    • Unscrew the right metal bracket of the viewing lens

  4. Unscrew the top right corner screw
    • Unscrew the top right corner screw

  5. Unscrew the bottom right corner screw.
    • Unscrew the bottom right corner screw.

  6. Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force. Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force.
    • Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force.

  7. Kostenloser Versand für alle Bestellungen über 100,00 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um

    Erfolgreich repariert? Genial!

    Teile ein Foto deiner Reparatur mit dem Hashtag #ImAGenius

    Wir sind alle Genies

    Teile ein Foto deiner Reparatur mit dem Hashtag #ImAGenius

  8. Pull the front of the camera off of the mother board. Pull the front of the camera off of the mother board.
    • Pull the front of the camera off of the mother board.

  9. Unscrew the grey plastic around the screen
    • Unscrew the grey plastic around the screen

  10. Twist the grey bracket counterclockwise to remove it from the silver LCD bracket.
    • Twist the grey bracket counterclockwise to remove it from the silver LCD bracket.

  11. Maneuver to detach the flash bulb.
    • Maneuver to detach the flash bulb.

  12. Unscrew the metal bracket under the lens
    • Unscrew the metal bracket under the lens

  13. Slide the plastic bracket through the metal bracket.
    • Slide the plastic bracket through the metal bracket.

    • Remove the orange cable from the motherboard.

  14. Pull the black tape off.
    • Pull the black tape off.

  15. Unscrew the two screws underneath.
    • Unscrew the two screws underneath.

    • Remove lens

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Crista Riedy

Mitglied seit: 12.02.2013

406 Reputation

3 Anleitungen geschrieben

Team

Ohio State, Team 1-2, Buehl Spring 2013 Mitglied von Ohio State, Team 1-2, Buehl Spring 2013

OSU-BUEHL-S13S1G2

2 Mitglieder

5 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 524