Einleitung

This guide will show you how to remove the logic board from the Nokia 3560.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Press down on the release latch on the bottom of the cover. Once the latch is released, lift the cover from the phone.
    • Press down on the release latch on the bottom of the cover.

    • Once the latch is released, lift the cover from the phone.

  2. Lift the front case off of the phone body.
    • Lift the front case off of the phone body.

  3. Lift the keypad off of the phone. Lift the keypad off of the phone.
    • Lift the keypad off of the phone.

  4. Kostenloser Versand für alle Bestellungen über 100,00 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  5. The screen is held to the body by six screws.
    • The screen is held to the body by six screws.

  6. Unscrew the six screws with a Torx screwdriver (six-pointed star shaped bit).
    • Unscrew the six screws with a Torx screwdriver (six-pointed star shaped bit).

  7. Insert a flat screwdriver between the black body and plastic layer. Insert a flat screwdriver between the black body and plastic layer.
    • Insert a flat screwdriver between the black body and plastic layer.

  8. Pry the layers apart. The LCD and plastic layer will lift out as one piece.
    • Pry the layers apart. The LCD and plastic layer will lift out as one piece.

  9. With the screws removed, the logic board can then be lifted out of the body by hand.
    • With the screws removed, the logic board can then be lifted out of the body by hand.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Sam Ryan

Mitglied seit: 18.04.2010

1 Reputation

8 Anleitungen geschrieben

Team

Cal Poly, Team 30-39, Garner Spring 2010 Mitglied von Cal Poly, Team 30-39, Garner Spring 2010

CPSU-GARNER-S10S30G39

5 Mitglieder

16 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 3

Insgesamt: 1,735