Einleitung

This guide will show you how to remove the assembly that houses the phone's keypad, speaker and screen.

Ersatzteile

Kein Ersatzteil erforderlich.

Press the button to remove the back cover. Pull the cover downward and lift it off while still pressing the button.
  • Press the button to remove the back cover.

  • Pull the cover downward and lift it off while still pressing the button.

Kommentar hinzufügen

Lift the battery out of the phone by pushing down from the top and pulling out
  • Lift the battery out of the phone by pushing down from the top and pulling out

Kommentar hinzufügen

Grip the front cover from the bottom.
  • Grip the front cover from the bottom.

Kommentar hinzufügen

Lift the front cover off.
  • Lift the front cover off.

Kommentar hinzufügen

Locate 6 screws on front of assembly and unscrew them using a T6 torx screwdriver.
  • Locate 6 screws on front of assembly and unscrew them using a T6 torx screwdriver.

Kommentar hinzufügen

Insert spudger along edge of assembly and gently lift assembly away from case
  • Insert spudger along edge of assembly and gently lift assembly away from case

Kommentar hinzufügen

Remove assembly from phone
  • Remove assembly from phone

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Colby Leslie

Mitglied seit 05.10.2010

1 Reputation

9 Anleitungen geschrieben

Team

Cal Poly, Team 22-3, Maness Fall 2010 Mitglied von Cal Poly, Team 22-3, Maness Fall 2010

CPSU-MANESS-F10S22G3

4 Mitglieder

9 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 897