Zum Hauptinhalt wechseln

Disassembling Nokia X2-00

Was du brauchst

  1. Disassembling Nokia X2-00, Nokia X2-00 Background Info: Schritt 1, Bild 1 von 1
    • it's a cheap low-end Music Phone

    • mine got wet so i decided to clean it up and look inside!

  2. Disassembling Nokia X2-00, Removing the Battery: Schritt 2, Bild 1 von 3 Disassembling Nokia X2-00, Removing the Battery: Schritt 2, Bild 2 von 3 Disassembling Nokia X2-00, Removing the Battery: Schritt 2, Bild 3 von 3
    • Flip it and pull the tab

    • the metal part should jump right off

    • after that remove the battery and sim card

  3. Disassembling Nokia X2-00, Diging In!: Schritt 3, Bild 1 von 1
    • so i was kinda !#^&@@ off becouse there were no screws!

    • so i tryed to remove the screen protection, and it worked!

    • 1. i did break it

    • 2. there were no screws

    • just don't do that unless you need

  4. Disassembling Nokia X2-00, Diging In! 2nd attemp!: Schritt 4, Bild 1 von 2 Disassembling Nokia X2-00, Diging In! 2nd attemp!: Schritt 4, Bild 2 von 2
    • i tried to remove the side panels but that didn't work so i tried on top and it did work (Jimmy worked fine)

    • these clips kind of suck ....it takes lot of force to unclip these )

    • after you unclip it you get that piece

  5. Disassembling Nokia X2-00, Removing the midframe: Schritt 5, Bild 1 von 3 Disassembling Nokia X2-00, Removing the midframe: Schritt 5, Bild 2 von 3 Disassembling Nokia X2-00, Removing the midframe: Schritt 5, Bild 3 von 3
    • remove these 2 TR6 Screws (mine were a bit blue)

    • open it up (clips on the bottom)

    • i was on Beast-Mode on these annying clips that held like gorilla

  6. Disassembling Nokia X2-00, Removing the display: Schritt 6, Bild 1 von 3 Disassembling Nokia X2-00, Removing the display: Schritt 6, Bild 2 von 3 Disassembling Nokia X2-00, Removing the display: Schritt 6, Bild 3 von 3
    • Remove the 4 TR6 Screws

    • They are diffrent from the last ones !!! (this one on the right)

    • remove the whole PCB and remove the clips from the display and it should pop off

  7. Disassembling Nokia X2-00, The Display: Schritt 7, Bild 1 von 2 Disassembling Nokia X2-00, The Display: Schritt 7, Bild 2 von 2
    • it's TFT 2.2" 240x320 182 ppi Display

  8. Disassembling Nokia X2-00, The main PCB: Schritt 8, Bild 1 von 1
    • anything shiehielded ...and non-replacable ...i don't like that one at all

    • sorry guys i have forgott to make photo of the backside :(

  9. Disassembling Nokia X2-00, Extra - Mastery pieces & Test: Schritt 9, Bild 1 von 2 Disassembling Nokia X2-00, Extra - Mastery pieces & Test: Schritt 9, Bild 2 von 2
    • extra steps that you don't need to do

    • 2 of those fell of and i have NO idea where from (and i don't even care)

    • i cleaned it up and powered it up and it works (just make sure you don't short anything)

  10. Disassembling Nokia X2-00, The END: Schritt 10, Bild 1 von 1
    • i don't really like that one becouse it's hard to open and easy to crack plastics

    • but you can replace many things (not anything)

    • i would like USB on doughterboard and less shielding

Ziellinie

9 weitere Nutzer:innen haben diese Anleitung absolviert.

Mateusz

Mitglied seit: 10/20/14

1.498 Reputation

2 Anleitungen geschrieben

Ein Kommentar

Well done,come on

Segmenttopten - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 15

Insgesamt: 5,013