Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Ersatzteile

Keine Ersatzteile angegeben.

  1. Remove the five Phillips #00 bottom and right side panel screws. Remove the five Phillips #00 bottom and right side panel screws.
    • Remove the five Phillips #00 bottom and right side panel screws.

  2. Remove the right side panel by pulling off the large silver piece.
    • Remove the right side panel by pulling off the large silver piece.

  3. Remove the remaining three Phillips #00 side and front panel screws. Remove the remaining three Phillips #00 side and front panel screws.
    • Remove the remaining three Phillips #00 side and front panel screws.

  4. Essential Electronics Toolkit

    Kompakte Alleskönner.

    Shop Toolkits

    Essential
    Electronics
    Toolkit

    Shop Toolkits
  5. Using your thumb and forefinger, pull off the silver name plate and silver "T-shape" piece.
    • Using your thumb and forefinger, pull off the silver name plate and silver "T-shape" piece.

  6. Remove the black front panel by sliding it towards the lens and then pulling it up off of the camera.
    • Remove the black front panel by sliding it towards the lens and then pulling it up off of the camera.

  7. Remove the three Phillips #00 screws from the front of the camera. Using a spudger, lift the two tabs to separate the case—one tab on top and one tab on the right side. Using a spudger, lift the two tabs to separate the case—one tab on top and one tab on the right side.
    • Remove the three Phillips #00 screws from the front of the camera.

    • Using a spudger, lift the two tabs to separate the case—one tab on top and one tab on the right side.

  8. Using a plastic spudger, lift up the black clips. Still using the plastic spudger, detach the gold connector strip and white connector strip. Using both hands, pull the camera apart into two pieces.
    • Using a plastic spudger, lift up the black clips.

    • Still using the plastic spudger, detach the gold connector strip and white connector strip.

    • Using both hands, pull the camera apart into two pieces.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Max McIntyre

Mitglied seit: 21.01.2011

526 Reputation

4 Anleitungen geschrieben

Team

Cal Poly, Team 13-4, Forte Winter 2011 Mitglied von Cal Poly, Team 13-4, Forte Winter 2011

CPSU-FORTE-W11S13G4

6 Mitglieder

6 Anleitungen geschrieben

How did you get the ring around the lens off?? I can't seem to find that step and in all the pictures it's already off

Maureen - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 1

Letzten 7 Tage: 2

Letzten 30 Tage: 12

Insgesamt: 2,701