Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Was du brauchst
-
-
Unscrew the bottom and right side panel screws using a #00 screwdriver. (5 screws)
-
-
-
Unscrew the remaining side and front panel screws using a #00 screwdriver. (3 screws)
-
-
-
-
Using your thumb and forefinger, pull off the silver name plate and silver "T-shape" piece. (2 pieces)
-
-
-
Remove the black front panel by sliding it towards the lens and then pulling it up off the camera.
-
-
-
Remove 3 screws from the front of the camera using a #00 screwdriver.
-
Lift the two tabs to separate the case using a spudger. (one tab on top and one tab on the right side)
-
-
-
Using a plastic spudger, lift up the black clips.
-
Still using the plastic spudger, detach the gold connector strip and white connector strip.
-
Using both hands, pull the camera apart into two pieces.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.