Was du brauchst
-
-
Remove the four rubber screw covers from encircled locations.
-
Using a #0 tri wing screwdriver, remove the screws previously hidden below the rubber covers.
-
If you have difficulties finding this screwdriver, it is commonly sold as a Nintendo Gameboy/Wii screwdriver.
-
-
-
Pry the case open using iPhone tool (as shown), fingernails, small flathead screwdriver, etc.
-
Be mindful of location and magnitude of applied force, so as not to damage the case.
-
-
-
Unlock the minor LCD connector by applying bilateral pressure with tweezers, as shown.
-
-
-
-
Unlock the LCD connectors shown in red boxes on the picture .
-
Use tweezers as necessary.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Eine weitere Person hat diese Anleitung absolviert.
Team
Cal Poly, Team 2-10, Johann Summer 2010 Mitglied von Cal Poly, Team 2-10, Johann Summer 2010
CPSU-JOHANN-R10S2G10
4 Mitglieder
20 Anleitungen geschrieben
