Ersatzteile

Kein Ersatzteil erforderlich.

  1. Remove the four rubber screw covers from encircled locations.
    • Remove the four rubber screw covers from encircled locations.

    • Using a #0 tri wing screwdriver, remove the screws previously hidden below the rubber covers.

    • If you have difficulties finding this screwdriver, it is commonly sold as a Nintendo Gameboy/Wii screwdriver.

  2. Pry the case open using iPhone tool (as shown), fingernails, small flathead screwdriver, etc.
    • Pry the case open using iPhone tool (as shown), fingernails, small flathead screwdriver, etc.

    • Be mindful of location and magnitude of applied force, so as not to damage the case.

  3. Kostenloser Versand für alle Bestellungen über 100,00 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  4. Unlock the minor LCD connector by applying bilateral pressure with tweezers, as shown.
    • Unlock the minor LCD connector by applying bilateral pressure with tweezers, as shown.

  5. Use fingernails to pry off minor LCD mount, as shown.
    • Use fingernails to pry off minor LCD mount, as shown.

    • Remove the minor LCD

Abschluss

To reassemble your device, follow these instructions in reverse order.

Van

Mitglied seit: 24.06.2010

7 Reputation

8 Anleitungen geschrieben

Team

Cal Poly, Team 2-10, Johann Summer 2010 Mitglied von Cal Poly, Team 2-10, Johann Summer 2010

CPSU-JOHANN-R10S2G10

4 Mitglieder

20 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 1,272