Einleitung

In this guide, the grip will be removed so the battery, wires, or board can be accessed.

Werkzeuge

Ersatzteile

Kein Ersatzteil erforderlich.

Remove the four screws from the grip with the 5/64" allen wrench. There are two on each side. Remove the four screws from the grip with the 5/64" allen wrench. There are two on each side.
  • Remove the four screws from the grip with the 5/64" allen wrench. There are two on each side.

Kommentar hinzufügen

Pull the grip away from the frame. Pull the grip away from the frame.
  • Pull the grip away from the frame.

Kommentar hinzufügen

Pull the grip through the opening. The grip is connected in the middle and is one piece.
  • Pull the grip through the opening.

  • The grip is connected in the middle and is one piece.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Rett Triplett

Mitglied seit 18.10.2013

801 Reputation

8 Anleitungen geschrieben

Team

Clemson, Team 13-6, Benson Fall 2013 Mitglied von Clemson, Team 13-6, Benson Fall 2013

CLEM-BENSON-F13S13G6

3 Mitglieder

8 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 3

Insgesamt: 332