Einleitung
The Polaroid a520 Camera cover may be removed/disassembled by the consumer at home, with no need for manufacturer involvement. This guide will assist users in the process by showing step-by-step which components should be removed for this purpose.
Note: this guide is only for the purpose of aiding in repairs to the Polaroid a520, and only for repairs that may be accessed through the battery cover.
Was du brauchst
-
-
Remove four 3 mm screws on the right side of the camera using a Phillips #1 screwdriver.
-
-
-
Use your nail or a flat object to pry up the edge of the front casing. Push the casing up and back.
-
-
-
Under the screen, locate the black plastic strip that sits above the white plastic strip.
-
-
-
Pull both sides of the black piece upward-about a mm.
-
Once the piece is lifted carefully slide the screen out of the slot.
-
-
-
Remove the four 6mm screws from the inner casing using a Phillips #00 screwdriver.
-
-
-
Pull the inner casing off. If all the screws are out, the casing will come off easily.
-
-
-
From the other side pull the pin all the way out. The battery cover will fall off.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
Cal Poly, Team 3-3, Johann Summer 2010 Mitglied von Cal Poly, Team 3-3, Johann Summer 2010
CPSU-JOHANN-R10S3G3
2 Mitglieder
7 Anleitungen geschrieben
