Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
This is how you would remove the outer panels of the Sanyo VPC-T850. This step is required for any repairs or a tear down.
Was du brauchst
-
-
Turn the camera off by pressing the small, square button embedded in the top rim of the camera.
-
Slide out and open the hatch located on the bottom-right side of the camera.
-
In the revealed compartment, move the small notch and push in on the battery to remove it.
-
-
-
Using the Phillips #00 Screwdriver, remove the 8 screws located around the sides and bottom of the camera.
-
-
-
Using the spudger, slowly pry the rear panel away from the left side.
-
-
-
-
Using the Phillips #00 Screwdriver, remove the 8 black screws connecting the green keypad chip to the rear panel.
-
-
-
Using the Phillips #00 Screwdriver, remove the 3 screws located across the top of the camera.
-
-
-
Using the spudger, gently pry the front cover of the camera off.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
Cal Poly, Team 27-95, Amido Spring 2010 Mitglied von Cal Poly, Team 27-95, Amido Spring 2010
CPSU-AMIDO-S10S27G95
4 Mitglieder
4 Anleitungen geschrieben
