Einleitung

Removing the back panel from the Toshiba AT1304T

If you can't get a hold of a Torx 6 Security Screwdriver, a small flathead can be used as a substitute

Using a thumb-tack, push-pin, or similar pin, remove the four plastic stoppers located on the back panel.
  • Using a thumb-tack, push-pin, or similar pin, remove the four plastic stoppers located on the back panel.

Kommentar hinzufügen

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
With the T8 Torx Security Bit Screwdriver, remove the four screws in the designated locations.
  • With the T8 Torx Security Bit Screwdriver, remove the four screws in the designated locations.

  • The T8 Torx Security Bit Screwdriver can be substituted with a small flathead screwdriver. Screw removal may be slightly more difficult however.

Kommentar hinzufügen

If needed, use the flathead screwdriver to gently pry the panel from the phone. Using your fingers, lift the panel from the device.
  • If needed, use the flathead screwdriver to gently pry the panel from the phone.

  • Using your fingers, lift the panel from the device.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Christopher

Mitglied seit 22.04.2010

90 Reputation

16 Anleitungen geschrieben

Team

Cal Poly, Team 16-6, Maness Spring 2010 Mitglied von Cal Poly, Team 16-6, Maness Spring 2010

CPSU-MANESS-S10S16G6

4 Mitglieder

16 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 1,902