Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Was du brauchst
-
-
First, you must release the air.
-
To release the air from the tire, press the center spoke in the middle of the air pressure valve.
-
Release air until no more air is being released.
-
-
-
-
Use a sturdy, long object, such as a screwdriver or the back of a spoon, to wedge in between the tire and the wheel
-
-
-
To remove the tube, all you need to do is pull the tube from the inner lining of the tire.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
Cal Poly, Team 1-1, Propen Fall 2012 Mitglied von Cal Poly, Team 1-1, Propen Fall 2012
CPSU-PROPEN-F12S1G1
5 Mitglieder
9 Anleitungen geschrieben
Ein Kommentar
Be very careful using a screwdriver to unseat the tire as it is very likely you will pinch and thus ruin the tube. Better to buy several tire levers at any bike shop - they are inexpensive and made for this job.
