Einleitung
The VTech has two cases. The main case housing the main circuit board and other components and a smaller enclosure that houses the screen and two buttons. This guide is how to disassemble the Vtech to gain access to the screen and button components.
Was du brauchst
-
-
Remove the four plastic caps with a metal spudger to expose the 6.0 mm Philips JIS #0 case screws.
-
Remove the eight 6.0 mm JIS #0 case screws.
-
-
-
-
Remove the three 4.0 mm Philips J0 screws holding the "L" shaped brackets in place.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
2 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
USF Tampa, Team 8-3, Eyestone Fall 2015 Mitglied von USF Tampa, Team 8-3, Eyestone Fall 2015
USFT-EYESTONE-F15S8G3
3 Mitglieder
17 Anleitungen geschrieben
Ein Kommentar
Does anyone know what company in china sells the touch screen replacement?
