Zum Hauptinhalt wechseln

Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.

Disassembling Xbox 360 E Bottom Panel

Grundständige Anleitung
Dies ist eine grundständige Anleitung, die nur als Teil einer anderen Anleitung verwendet werden sollte.

Was du brauchst

  1. Disassembling Xbox 360 E Bottom Panel, Bottom Panel: Schritt 1, Bild 1 von 1
    • Push the spudger into the crevice between the right grated face and the top body of the Xbox. It's easier to begin away from the vent.

    • Pull up on the spudger like a lever, keeping it pressed firmly into the crevice.

  2. Disassembling Xbox 360 E Bottom Panel: Schritt 2, Bild 1 von 2 Disassembling Xbox 360 E Bottom Panel: Schritt 2, Bild 2 von 2
    • Slide the spudger along the crevice to separate the grated face and the top body.

  3. Disassembling Xbox 360 E Bottom Panel: Schritt 3, Bild 1 von 3 Disassembling Xbox 360 E Bottom Panel: Schritt 3, Bild 2 von 3 Disassembling Xbox 360 E Bottom Panel: Schritt 3, Bild 3 von 3
    • Wiggle the spudger in the crevice as you slide the spudger to loosen the bottom plate.

    • Slide the spudger along the crevice, going completely about the perimeter of the bottom panel.

    • Pull the bottom panel off.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Jennifer

Mitglied seit: 02/02/14

1.903 Reputation

4 Anleitungen geschrieben

Team

Cal Poly, Team 2-11, Amido Winter 2014 Mitglied von Cal Poly, Team 2-11, Amido Winter 2014

CPSU-AMIDO-W14S2G11

4 Mitglieder

43 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 77