Einleitung

Behold the iClicker. This learning device is used in some college classrooms to help make the learning process more interactive. Course instructors can ask multiple choice questions and students can respond by pressing the button that corresponds to the answer they desire.

Dieser Teardown ist keine Reparaturanleitung. Um dein iClicker zu reparieren, verwende unsere Fehlerbehebungsseite.

  1. Behold the iclicker in all its interactive and educational beauty.
    • Behold the iclicker in all its interactive and educational beauty.

    Kommentar hinzufügen

  2. Place the device on a flat surface, buttons facing down.
    • Place the device on a flat surface, buttons facing down.

    • Remove the battery cover and the three batteries within.

    Kommentar hinzufügen

    • Remove the two visible screws using a #00 Phillips screwdriver.

    • Oops! Don't forget a hidden third screw beneath the factory label.

    • Peel back the corner of the label to reveal the hidden screw.

    • If you wish to maintain the integrity of the label, a blowdryer may be used to soften the adhesive on the label before removal.

    Kommentar hinzufügen

    • Depending on how much abuse your iclicker has endured, you might be able to separate the front and rear panels of the iclicker with your fingers.

    • For the more resistent iclickers, a spudger may be employed to separate the pieces.

    Kommentar hinzufügen

  3. Frohes Fest, frohes Tüfteln
    Pack's ein, pack's aus, pack's an: Erhalte 12 € Rabatt auf deinen Einkauf ab 50 € mit dem Code FIXMAS12
    Frohes Fest, frohes Tüfteln
    Pack's ein, pack's aus, pack's an: Erhalte 12 € Rabatt auf deinen Einkauf ab 50 € mit dem Code FIXMAS12
    • Your iclicker is now exposed for all its worth.

    • The back panel can be set aisde, as the remaining components are housed in the front panel.

    Kommentar hinzufügen

    • Using a spudger, gently pry the battery connectors from the front panel.

    Kommentar hinzufügen

    • If your circuit board is stuck in the front panel, use a spudger to lift the circuit board from the front panel.

    Kommentar hinzufügen

    • The buttons can be easily removed from the front assembly sans spudger.

    Kommentar hinzufügen

    • Don't lose the small LED cover sitting precariously in the front panel.

    Kommentar hinzufügen

    • Your iclicker is now disassembled.

    Kommentar hinzufügen

What is an iClicker ?

furbies - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 1

Letzte 7 Tage: 8

Letzte 30 Tage: 26

Insgesamt: 6,913