Zum Hauptinhalt wechseln

Dreamax DMX-ST7A Camera Replacement

Was du brauchst

  1. Dreamax DMX-ST7A Camera Replacement, Back Cover: Schritt 1, Bild 1 von 1
    • Position the tablet so the ports and screws are facing you.

  2. Dreamax DMX-ST7A Camera Replacement: Schritt 2, Bild 1 von 1
    • Remove the two 2.5mm screws using the Phillips #00 precision screwdriver.

  3. Dreamax DMX-ST7A Camera Replacement: Schritt 3, Bild 1 von 2 Dreamax DMX-ST7A Camera Replacement: Schritt 3, Bild 2 von 2
    • Use the plastic opening tool to assist in removing the back cover.

  4. Dreamax DMX-ST7A Camera Replacement: Schritt 4, Bild 1 von 1
    • Upon removing the back cover position the tablet as seen in the picture.

  5. Dreamax DMX-ST7A Camera Replacement, Camera: Schritt 5, Bild 1 von 3 Dreamax DMX-ST7A Camera Replacement, Camera: Schritt 5, Bild 2 von 3 Dreamax DMX-ST7A Camera Replacement, Camera: Schritt 5, Bild 3 von 3
    • Lift the black bar towards the right to expose the data strip.

  6. Dreamax DMX-ST7A Camera Replacement: Schritt 6, Bild 1 von 3 Dreamax DMX-ST7A Camera Replacement: Schritt 6, Bild 2 von 3 Dreamax DMX-ST7A Camera Replacement: Schritt 6, Bild 3 von 3
    • Remove the data strip and camera.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Team

Michigan Tech, Team 1-4, Lauer Spring 2015 Mitglied von Michigan Tech, Team 1-4, Lauer Spring 2015

MTU-LAUER-S15S1G4

2 Mitglieder

10 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 2

Insgesamt: 156